W.A Productio 发布新一代失真放大器插件 Heat 2

更低、更猛、更震撼
点燃你的贝斯和鼓!

WA Productio Heat 2.jpg

Presenting HEAT 2 - the original twin distortion powerhouse, now with a stunning refresh.
This face-melting plugin features an intuitive new interface, more accurate frequency monitoring and a host of under-the-hood improvements.​

HEAT 2 - 原创的双失真插件,现在有了惊人的更新。
这款面部融合插件具有直观的新界面、更准确的频率监控和一系列底层改进。
Choose two of your favourite distortion and saturation models, and blend them together for fuzz-box fun.
You can shape the two effected signals with high and low pass filters,
resulting in a more musical output than many other types of distortion plugins.
Tweak the parameters to your personal taste within the refreshed interface, newly designed to sit right alongside our other inspiring plugins.
The audio processing is now much clearer, with a top-to-bottom approach so it’s now easy to follow the signal flow and create amped-up overdrive.​

选择两个您最喜欢的失真和饱和模型,并将它们混合在一起以获得模糊盒的乐趣。
您可以使用高通和低通滤波器对两个受影响的信号进行整形,
从而产生比许多其他类型的失真插件更具音乐性的输出。
在更新的界面中根据您的个人喜好调整参数,新设计的界面与我们其他鼓舞人心的插件并列。
音频处理现在更加清晰,采用自上而下的方法,因此现在可以轻松跟踪信号流并创建放大的过载。

HeatDesign_render02b_2.png

Of course, we’ve also included loads of factory presets to kickstart your distortion discoveries,
from extreme settings for smashing your audio, to more tempered values for vocals, bass and drums.
Use these presets as jumping-off points and then adjust the drive, blend, filters and other parameters to create your unique sound.​

当然,我们还包含大量出厂预设,以启动您的失真发现,
从用于破坏音频的极端设置到更温和的人声、贝司和鼓值。
使用这些预设作为起点,然后调整驱动器、混合、过滤器和其他参数以创建您独特的声音。
Blend 10 Devastating Distortion Types
The whole concept of HEAT 2 is to apply twin distortion and then shape the signals so that your audio is powerful, yet retains musicality.
The starting point for this are the 10 different types of modelled distortion. These models all have adjustable drive levels.
With a wide range of different distortion type you can easily craft every timbre from subtle harmonics to blow-the-doors-off distortion.
Each of these 10 types of processing will produce a different character and timbre, so experiment by blending between them using the central dial.​

混合 10 种毁灭性的失真类型
HEAT 2 的整个概念是应用双失真,然后对信号进行整形,使您的音频既强大又不失音乐性。
这样做的起点是 10 种不同类型的建模失真。这些型号都具有可调节的驱动电平。
借助各种不同的失真类型,您可以轻松制作从微妙的谐波到爆破失真的每一种音色。
这 10 种处理方式中的每一种都会产生不同的特性和音色,因此请使用中央表盘在它们之间进行混合进行实验。
Twin Filters
These two filter controls allow you to shape your distortion far more musically than stock plugins.
Separately adjust the High and Low frequency cut off parameters for the two different distortion modules.
For example, you might only want to crush the mid-range of a synth part, giving it more crunch and power.
Or maybe just distort the lowest frequencies of a fat kick drum.
Combine two different types of distortion with two different filter shapes
and get your audio production-ready with the precision of surgical saturation.​

双过滤器
这两个过滤器控件使您可以比其它插件更具音乐性地塑造失真。
分别调整两个不同失真模块的高频和低频截止参数。
例如,您可能只想粉碎合成器部分的中频,使其更加紧缩和强大。
或者也许只是扭曲了肥底鼓的最低频率。
将两种不同类型的失真与两种不同的滤波器形状相结合,
让您的音频制作准备就绪,具有外科饱和度的精度。

HeatDesign2_GUI_2.jpg

Input, Output & Mix Ratio
Use the Input and Output sliders to compensate for any gain boost or reduction caused by the distortion chambers with up to +/- 48dB attenuation.
This allows for very accurate comparisons when A/Bing.
Use the Mix ratio control at the bottom centre of the interface to dial in as much (or as little) of the distortion types as you need.
Apply a conservative ratio for subtle saturation and sweetening, or push the control further to hear the 100% destroyed signal.​

输入、输出和混合比
使用输入和输出滑块补偿由失真室引起的任何增益提升或降低,衰减高达 +/- 48dB。
这允许在 A/Bing 时进行非常准确的比较。
使用界面底部中心的混合比率控件,可以根据需要拨入尽可能多(或尽可能少)的失真类型。
应用保守的比例以获得微妙的饱和度和甜味,或进一步推动控制以听到 100% 被破坏的信号。
Visual Feedback
The new and improved live frequency meters at the top of the interface show exactly what’s happening to the signal as it’s being processed in real time.
This allows for accurate monitoring each time you decide to make a change to the distortion type or level.
The output of the right-hand module is shown as an orange waveform, the output of the left-hand module shown in yellow.
This makes it easy to tell the difference between the two types of distortion that you’re applying to the signal and exactly which parts of the signal the filters are targeting.​

视觉反馈
界面顶部的新的和改进的实时频率计准确地显示了信号在实时处理过程中发生的情况。
这样可以在您每次决定更改失真类型或级别时进行准确的监控。
右侧模块的输出显示为橙色波形,左侧模块的输出显示为黄色。
这使得您可以轻松区分您对信号应用的两种失真类型以及滤波器所针对的信号的确切部分。
Presets
With many included presets, it’s easy to select starting points for your own distortion adventures.
Tailored to specific instruments, genres and effects, these factory options can be used on many types of audio.
The presets include everything from delicate distortion to all-out smashed saturation.​

预置
通过包含许多预设,您可以轻松选择自己的失真冒险的起点。
这些出厂预置针对特定的乐器、流派和效果量身定制,可用于多种类型的音频。
预设包括从微妙的失真到全面的饱和饱和度的所有内容。
W. A. Production are real-life producers making creative plugins
to help you achieve studio quality processing quickly and easily. Enjoy!​

WA Production 是现实生活中制作创意插件的制作人,
可帮助您快速轻松地实现工作室质量处理。享受!

Heat2_3.gif

Features:
NEW: ACCURATE VISUAL FEEDBACK
NEW: UPDATED INTERFACE WITH CLEAR SIGNAL FLOW
NEW: UNDER-THE-HOOD TWEAKS & IMPROVEMENTS
Filtered Twin Saturation & Distortion
10 Unique Distortion types
Signal Blending & Frequency Filtering
Responsive & CPU friendly
Click and Pop-free Bypass
Resizable interface
Factory Presets
Full PDF Manual & Tutorial video​

特征:
新:准确的视觉反馈
新:更新的界面清晰的信号流
新:引擎盖下的调整和改进
过滤双饱和度和失真
10 种独特的失真类型
信号混合和频率滤波
响应和 CPU 友好
点击和无弹出绕过
可调整大小的界面
出厂预置
完整的 PDF 手册和教程视频

首发优惠价:14.9美元(3月3日优惠结束后,原价:49.5美元)
官网地址:https://www.waproduction.com/plugins/view/heat-2
中国区的用户购买请联系总代理飞来音电脑音乐技术。​
 
祖传的GUI,不过他们家的效果器还挺好用的。
 
不打算上个架么:cool:
 

飞来音

无问不答指挥官
社区管理员
KONTAKT VIP
中级 VIP
初级 VIP
🧱星陨矿
867,341
🧊星能体
85
🍀星灵素
50
🏵️星元核
100