PSPaudioware 发布新一代光学电子管压缩器插件 PSP Impressor

PSPaudioware 已经决定进入一个新时代，全新的PSP插件具有新的界面风格，并且全部使用 iLok 授权。
PSP Impressor 作为一个全新的光电压缩器，搭载了侧链滤波和可作为限制器使用等现代常用功能。

The PSP Impressor is an incredibly accurate, a fully-featured, high-precision compressor designed to process whole mixes, busses or single tracks.
PSP Impressor emulates the magical classic characteristics of compressors with valve and opto-electronic circuits as well as classic modern compressors.
PSP Impressor also features a highly configurable side-chain. The side-chain filter has a significant effect on PSP Impressor’s sound and operation.
Depending on your side-chain filter settings, the filter also lets you use the compressor as a de-esser or to reduce the pumping effects of heavy kick drums and the like.

PSP Impressor 是一款非常准确、功能齐全的高精度压缩器，可以用于处理整个混音、总线或在单轨上使用。
PSP Impressor 模拟了带有电子管和光电电路的压缩器以及经典的现代压缩器的神奇经典特性。
PSP Impressor 还具有高度可配置的侧链。侧链滤波器对 PSP Impressor 的声音和操作有显著影响。
根据你的侧链滤波器设置，滤波器还允许你将压缩器用作去咝声器或减少重型底鼓的抽吸效果等。

PSP Impressor also works very well in combination with the PSP Saturator.
With the PSP Impressor before the PSP Saturator in the signal path (think of it like placing a bus compressor before a tape machine),
you can employ both plug-ins simultaneously (using subtle settings!) in order to impart a very cohesive sound, like your mix was being produced on expensive analog hardware.
Of course, you can also reverse the order, placing PSP Saturator before PSP Impressor - never be afraid to experiment!

PSP Impressor 与 PSP Saturator 结合使用也非常好。
在信号链路中将另一款饱和插件 PSP Saturator 放在 PSP Impressor 之前使用（将其想象为在磁带机之前放置总线压缩器），
你可以同时使用两个插件（使用巧妙的参数！）以获得非常有凝聚力的声音，就像你的混音是在昂贵的模拟硬件上制作的一样。
当然，你也可以颠倒顺序，将 PSP Saturator 放在 PSP Impressor 之前 - 要学会折腾！

PSP Impressor Features
A wide range of soft knee characteristics
Peak or RMS level detection
External or internal side chain signal with a smooth bell-type filter
An output algorithm which can operate as either a brick wall limiter or soft saturation algorithm to preserve peaks above 0dBFS.

PSP Impressor 特性
全面的软拐点特性
峰值或 RMS 电平检测
带有平滑钟形滤波器的外部或内部侧链信号
一种输出算法，可以作为砖墙限制器或软饱和算法运行，以保持高于 0dBFS 的峰值。

System Requirements
In order to run PSP Impressor in 30-day trial mode or activate it, you don't need any hardware dongle but you need an iLok user ID which you can create for free at www.ilok.com,
and you need to install the free iLok License Manager application.
You can activate the license in 3 separate locations, each of which can be either a computer or an iLok dongle (2nd generation or above).
You can move these licenses at any time using PACE's iLok License Manager software.

系统要求
为了在 30 天试用模式下运行 PSP Impressor 或激活它，您不需要任何硬件加密狗，但您需要一个 iLok 用户 ID，
您可以在 www.ilok.com 免费创建该用户 ID，并且您需要安装免费的 iLok 许可证管理器应用程序。
您可以在 3 个不同的位置激活许可证，每个位置都可以是计算机或 iLok 加密狗（第 2 代或更高版本）。
您可以随时使用 PACE 的 iLok License Manager 软件移动这些许可证。

PC
VST3/VST/AAX
Windows 7 – Windows 11
64-bit compatible application

macOS Intel or macOS Silicon
AudioUnit/VST/VST3/AAX
macOS 10.12 – macOS 12.01 Monterey
64-bit compatible host application